Table of Contents
Advertisement
General – Concerning your safety
1.2.10.4
Maintenance work on electric components and battery
1.2.10.5
Working on the air conditioning
1.2.10.6
Working on wheels and tyres
30
Store used filters and other oil contaminated materials in a sepa-
rate, specially marked container and dispose of them in an environ-
mentally friendly way.
The settings for idle speed and highest speed must not be
changed, since this would affect the exhaust gas values and cause
damage to engine and power train.
Engine and exhaust system work at high temperatures. Keep com-
bustible materials away and do not touch any hot surfaces.
Check and change coolant only when the engine is cold. Collect
coolant and dispose of it in an environmentally friendly way.
Before starting to work on electric parts of the machine disconnect
the battery and cover it with insulating material.
Do not use fuses with higher ampere ratings and do not bridge
fuses.
When working on the battery, smoking or open fire is prohibited!
Do not lay any tools or other metal objects on the battery.
Do not wear jewellery (watch, bracelets, etc.) when working on the
battery.
The connection cables of the battery must not touch or rub against
machine parts.
Faults on the air conditioning should only be remedied by author-
ized service personnel.
Do not perform welding work in the vicinity of the air conditioning.
Danger of explosion!
Do not release refrigerant into the atmosphere, but dispose of it in
line with environmental regulations.
Explosion-like bursting of tyres or parts of tyres and rims can cause
most severe or even fatal injuries.
Do not drive with damaged wheels or tyres.
Install the tyres only if you are sufficiently experienced and with the
right tools at hand. If necessary have the tyres assembled in a
qualified workshop.
Always ensure the correct tyre pressure and do not exceed the
specified maximum pressure.
BW 28 RH
Advertisement
Table of Contents
