Figure. Standard water tank
1. Tank cap
Figure. Hydraulic reservoir
1. Oil sight glass
2. Filler cap
2021-01-14
Water tank, Std - Filling
The filler cap is on the rear left side of the front frame.
Unscrew the tank cap (1) and fill with clean
Unscrew the tank cap (1) and fill with clean
1
water. Do not remove the strainer (2).
water. Do not remove the strainer (2).
Fill the central (standard) tank, it holds 750 liters (198
gal).
Only additive: A small amount of
Only additive: A small amount of
environment-friendly antifreeze.
environment-friendly antifreeze.
Hydraulic reservoir - Check fluid level
2
Place the roller on a level surface and check that the
oil level in the sight glass (1) is between the max and
min markings. Top up with the type of hydraulic fluid
specified in the lubricant specification, if the level is too
low.
1
4812159601_H.pdf
Maintenance, 10h
113