Safety - When Operating; Driving Near Edges - Fayat Group DYNAPAC CC234C Instruction Manual

2023-01-25

Safety - when operating

Prevent persons from entering or remaining in Prevent persons from entering or remaining in
the risk zone, i.e. a distance of at least 7 m (23 the risk zone, i.e. a distance of at least 7 m (23
ft) in all directions from operating machines. ft) in all directions from operating machines.
The operator may allow a person to remain in The operator may allow a person to remain in
the risk zone, however he/she must be attentive the risk zone, however he/she must be attentive
and operate the machine only when the person and operate the machine only when the person
is fully visible or has given a clear indication of is fully visible or has given a clear indication of
where he or she is. where he or she is.
Avoid driving across a slope. Drive straight up Avoid driving across a slope. Drive straight up
and down sloping ground. and down sloping ground.

Driving near edges

Never operate with the drum outside the edge, the Never operate with the drum outside the edge, the
substrate might not have full bearing strength or substrate might not have full bearing strength or
the edge is close to a slope. the edge is close to a slope.
Keep in mind that the machine's center of gravity Keep in mind that the machine's center of gravity
moves outwards when steering. For example, the moves outwards when steering. For example, the
center of gravity moves to the right when you steer center of gravity moves to the right when you steer
to the left. to the left.
4812159901_D.pdf
Safety - when operating
9