Advertisement
12.6.1
SD memor y card
Data in the controller can be saved on an SD memory card. The data can then be loaded
into the controller from the SD memory card.
c
CAUTION
Do not remove the SD memory card while data is being saved on it or
loaded from it. Removing the card at that time might corrupt the data.
n
NOTE
This controller allows handling subdirectories down to 8 levels of hierarchy
below the root directory. Operation to a subdirectory lower than this level is
not allowed.
n
NOTE
This controller supports only FAT12 and FAT16 fi le systems. If the fi les were
created on a PC, then the fi le names might differ from those displayed on
the PC.
[Inserting the SD memor y card]
Insert an SD memory card into the SD memory card slot on the front of the controller
until you hear a "click", while making sure the card is facing correctly (see below).
■ Inserting the SD memor y card
[Removing the SD memor y card]
Press in on the SD memory card installed in the slot until you hear a "click". The card
will then eject from the slot, so take it out of the slot.
12. "SYSTEM" mode
O P .2
!
SD memory card
Chapter
4
4-243
Advertisement
Chapters
