Advertisement
12.3.2.2 Help display in "SERVICE" mode
To display the help messages for "SERVICE" mode parameters, proceed as follows.
[Procedure]
1) Press
(HELP) in "SYSTEM>OPTION>SERVICE" mode.
■ Help display in "SERVICE" mode
SYSTEM>OPTION>SERVICE>HELP
Security level of serv. mode
LEVEL0 : No limit
LEVEL1 : Hold to Run
LEVEL2 : Prohibit operation in AUTO
LEVEL3 : LEVEL2 + Hold to Run
NEXT P. PREV.P.
2) Press
(NEXT P.) to display the next message page.
Press
(PREV. P.) to display the previous message page.
3) Press
to quit this mode.
12. "SYSTEM" mode
V9.00
Chapter
4
4-223
Advertisement
Chapters
