Figure 18 Two Torx Tx25 Screws Securing The Dc Output Power Cable Panel - Webasto ProCore Edge 9 Installation, Operation And Maintenance Manual

ProCore Edge North America
DC Output Power Cable Connection to
Three- and Five-bay Cabinets
Remove the TORX TX25 screws from the DC output
power cable panel located at the bottom left of the
charger (Figure 18), and pull the panel up and away
from the charger cabinet.
Figure 18 Two TORX TX25 Screws Securing
31241-03-01
the DC Output Power Cable Panel
Page 24 of 68
Webasto Charging Systems, Inc.
IOMM