4.12.16
The Output Format feature allows the user to select the format of their output data. The
customers using the IVECs system can select the "IDS Mode" while customers that are not
using IVECs can select "Standard Mode".
From the "Output Format Selection" screen, press <enter> to display the current data format.
Press <enter> again to enable editing. Use the <up> and <down> arrows to select the desired
data format for the Output Format display and press <enter> to save your configuration. Press
<clear> to exit.
CLEAR
4.12.17
Batt Cool Down Time
00.0 Hours
12876-W-03-01
Output Format Selection Menu
Output Format
Selection
ENTER
CLEAR
Output Format is:
Standard Mode
Output Format is:
IDS Mode
Figure 4-29 Output Format Selection Menu
Battery Cool Down Time
CLEAR
ENTER
Figure 4-30 Battery Cool Down Time Menu
SVS100N Operation/Maintenance Manual
Charger Configuration
CLEAR
Charger Configuration
Press ENTER and use the UP and
DOWN arrow buttons to set the
parameter to the appropriate value.
Press ENTER again to accept the
selection made.
Press CLEAR to retain the original
value
34
Webasto Charging Systems, Inc.