External Status Indicator Configuration (Optional); Dvs Periodic Maintenance; Dc Power Output Cable Service - Webasto PosiCharge DVS 300 Operation And Maintenance Manual

DVS Fast Charging System
6. Display Application Version Information – Allows user to view software version and
hardware configuration information.
7. Master Stations only- Energy Saving Mode Temporary Override – Allows user to
temporarily override the idle shutdown of the system in order to perform maintenance
(configuration, software upload, data download) without having a vehicle connected.
The override is cancelled when any vehicle connects.

5.9 External Status Indicator Configuration (Optional)

If the DVS is configured to drive external status lights, assignment of light outputs will be
possible for visual presentation of the current state of the charger. A set of three lights per port
may be controlled to alert the user to the current state of the charger. This is useful when the
user is in a position where the front panel of the DVS is not visible. The lights will show what
the charger is currently doing. The assignment of the lights is configured through the "Extern
Light Port X" submenu of the "Charger Configuration" menu.

6 DVS Periodic Maintenance

DC Power Output Cables

6.1 DC Power Output Cable Service

Refer to the GSE DVS field service manual, 23411-W-76, for output cable installation
instructions. Use only Burton BCDC-0008-P020 or equivalent approved output cable.
WARNING
If you have questions regarding a specific cable assembly or need to obtain documents,
please contact Customer Service.
23411-W-03-01
Maintenance Schedule
ITEM
Use only connectors and cable that are rated for the full continuous
current rating of the unit.
Page 18 of 29
SERVICE
Inspect and
Replace
Webasto Charging Systems, Inc.
INTERVAL
As Needed