Opening The Cable Management Arm - HPE ProLiant DL160 Gen10 Maintenance And Service Manual

WARNING: WARNING:
To reduce the risk of personal injury, be careful when pressing the server rail-release latches and sliding the server into
the rack. The sliding rails could pinch your fingers.
4. Extend the server on the rack rails until the server rail-release latches engage.
5. After the installation or maintenance procedure, slide the server into the rack:
a. Slide the server fully into the rack.
b. Secure the server by tightening the thumbscrews.
6. Connect the peripheral cables and power cords.

Opening the cable management arm

Opening the cable management arm
To access the server rear panel:
1. Release the cable management arm.
2. Open the cable management arm. The cable management arm can be right-mounted or left-mounted.
HPE ProLiant DL160 Gen10 Server Maintenance and Service Guide 36