HPE ProLiant DL160 Gen10 Maintenance And Service Manual page 37

Remove the server from the rack Remove the server from the rack
Prerequisites Prerequisites
Before you perform this procedure, review the:
Rack warnings and cautions
Server warnings and cautions
About this task About this task
WARNING: WARNING: To reduce the risk of personal injury or equipment damage, be sure that the rack is adequately stabilized before
extending anything from the rack.
Procedure Procedure
1. Power down the server.
2. Release the cable management arm .
3. Disconnect the cabling from the rear panel.
4. Extend the server from the rack .
5. Remove the server from the rack:
HPE ProLiant DL160 Gen10 Server Maintenance and Service Guide 37