HPE ProLiant DL160 Gen10 Maintenance And Service Manual page 107

Item Item Description Description
1 UID button/LED
2 NIC status LED
3 Health LED
4 Power On/Standby button and
system power LED
1
When all LEDs flash simultaneously, a power fault has occurred. For more information, see Front panel LED power fault codes.
2
If the health LED indicates a degraded or critical state, review the system Integrated Management Log (IML) or use HPE iLO to review
the system health status.
3
Facility power is not present, power cord is not attached, no power supplies are installed, or power supply failure has occurred.
Subtopics Subtopics
Server UID LED Server UID LED
Using the UID button to view the Server Health Summary Using the UID button to view the Server Health Summary
Front panel LED power fault codes Front panel LED power fault codes
Server UID LED Server UID LED
The UID LED is used to locate a particular server when it is deployed in a dense with other equipment. Activating the UID LED helps an on-
site technician to quickly identify a server for maintenance tasks.
Using the UID button to view the Server Health Summary Using the UID button to view the Server Health Summary
Prerequisites Prerequisites
An external monitor is connected.
In the iLO web interface, the Show Server Health on External Monitor feature is enabled on the Access Settings page.
Status Status
1
Solid blue
Flashing blue
Off
1
Solid green
Flashing green
Off
1
Solid green
Flashing green
Flashing amber
Flashing red
Solid green
1
Flashing green
Solid amber
Off
Definition Definition
Activated
1 flash per second = Remote management or
firmware upgrade in progress
4 flashes per second = iLO manual reboot
sequence initiated
8 flashes per second = iLO manual reboot
sequence in progress
Deactivated
Linked to network
Network active
No network activity
Normal
iLO is rebooting
System degraded
System critical
System on
Performing power-on sequence
System in standby
No power present
HPE ProLiant DL160 Gen10 Server Maintenance and Service Guide
2
2
3
107