HPE ProLiant DL160 Gen10 Maintenance And Service Manual page 88

10. To replace the component, reverse the removal procedure.
11. Properly dispose of the old battery.
For more information about battery replacement or proper disposal, contact an authorized reseller or an authorized service provider.
System board assembly replacement System board assembly replacement
Subtopics Subtopics
Removing the system board assembly Removing the system board assembly
Replacing the system board assembly Replacing the system board assembly
Re-entering the server serial number and product ID Re-entering the server serial number and product ID
Removing the system board assembly Removing the system board assembly
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
T-10 Torx screwdriver
T-15 Torx screwdriver
T-30 Torx screwdriver
System board handle tool
About this task About this task
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
HPE ProLiant DL160 Gen10 Server Maintenance and Service Guide 88