HPE ProLiant DL160 Gen10 Maintenance And Service Manual page 138

Hide thumbs Also See for ProLiant DL160 Gen10:

Table of Contents

For certain approved hardware configurations, the supported system inlet temperature range is extended:

5°C to 10°C (41°F to 50°F) and 35°C to 40°C (95°F to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per

every 574 ft) above 900 m (2953 ft) to a maximum of 3048 m (10,000 ft).

40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m

(2953 ft) to a maximum of 3048 m (10,000 ft).

The approved hardware configurations for this system are listed on the Hewlett Packard Enterprise website

Mechanical specifications

Specification

Value

Dimensions

Height

Depth

Width

Weight, approximate values —

Weight, approximate values

Minimum

Maximum

Power supply specifications

Depending on the installed options and the regional location where the server was purchased, the server can be configured with one of the

following power supplies. For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise

Subtopics

HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply

HPE 800 W Flex Slot Platinum Hot-plug Low Halogen Power Supply

HPE 800 W Flex Slot Titanium Hot-plug Low Halogen Power Supply

HPE 800 W Flex Slot Universal Hot-plug Low Halogen Power Supply

HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply

HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply

HPE

500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply

—

4.29 cm (1.69 in)

61.50 cm (24.21 in)

43.46 cm (17.11 in)

10.00 kg (22.03 lb)

16.00 kg (35.27 lb)

Hewlett Packard Enterprise website .

Hewlett Packard Enterprise website

HPE ProLiant DL160 Gen10 Server Maintenance and Service Guide

website.

138

Table of Contents