HPE ProLiant DL160 Gen10 Maintenance And Service Manual page 44

Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure Procedure
1. Back up all server data.
2. If installed, remove the front bezel .
3. Power down the server.
4. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
5. Disconnect all peripheral cables from the server.
6. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
7. Remove the access panel .
8. Remove the universal media bay blank.
Enable the enhanced cooling function Enable the enhanced cooling function
About this task About this task
The server generates more heat when Intel Xeon Gold 6244 Processor is installed. To maintain proper cooling, increase the fan speed.
Procedure Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options > Fan and
Thermal Options > Thermal Configuration.
HPE ProLiant DL160 Gen10 Server Maintenance and Service Guide 44