HPE ProLiant DL160 Gen10 Maintenance And Service Manual page 47

To replace the blank, slide the blank into the bay until it locks into place.
Removing and replacing a hot-plug drive Removing and replacing a hot-plug drive
About this task About this task
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with CAUTION:
either a component or a blank.
Procedure Procedure
1. Back up all server data on the drive.
2. Determine the status of the drive from the drive LED definitions .
3. Remove the drive.
LFF
SFF
HPE ProLiant DL160 Gen10 Server Maintenance and Service Guide 47