HPE ProLiant DL160 Gen10 Maintenance And Service Manual page 114

Processor, heatsink, and socket components Processor, heatsink, and socket components
System maintenance switch descriptions System maintenance switch descriptions
Position Position Default Default Function Function
1
S1 Off
S2 Off Reserved
S3 Off Reserved
S4 Off Reserved
1
S5 Off
1 , 2 3
S6 Off
S7 Off Reserved
S8 Off Reserved
S9 Off Reserved
S10 Off Reserved
S11 Off Reserved
S12 Off Reserved
1
To access the redundant ROM, set S1, S5, and S6 to On.
2
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all configuration settings
to their manufacturing defaults.
3
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot be
restored. For more information, see Configuring the server.
DIMM label identification DIMM label identification
To determine DIMM characteristics, see the label attached to the DIMM. The information in this section helps you to use the label to locate
specific information about the DIMM.
Off—iLO 5 security is enabled.
On—iLO 5 security is disabled.
Off—Power-on password is enabled.
On—Power-on password is disabled.
Off—No function
On—Restore default manufacturing settings
HPE ProLiant DL160 Gen10 Server Maintenance and Service Guide 114