Technical Specifications; Oscilloscope - Owon FDS Series User Manual

9.Technical Specifications

Unless otherwise stated, all technical specifications apply to digital
oscilloscope with the attenuation switch of the probe set to 10X.
 The instrument must be operated continuously for more than thirty minutes
under the specified operating temperature.
 If the operating temperature range changes not less than 5℃, it is required
to open the system function menu and execute "Self-calibration" program
(See "How to conduct self-calibration" in Page 13).
All specifications are guaranteed except those marked with "Typical".

Oscilloscope

Performance
Characteristics
Bandwidth
Vertical Resolution
Mode
Acquisiti
Real-time
on
Acquisition
Rate
Waveform Refresh Rate
Channel
Multi-level Gray Scale
Display & Color
Temperature
Display(Use gray scale
to indicate frequency of
occurrence,where
frequently occurring
waveform are bright.)
Horizontal Accuracy
9.Technical Specifications
100 MHz
FDS1102
FDS1102A
Normal, Peak detect, Averaging
Dual
CH
FDS1102
Single
CH
Dual
CH
FDS1102A
Single
CH
65,000 wfms/s
2
Support
±20 ppm (typical value, ambient temperature: +25℃)
131
Instruction
8 bits
8 bits /12 bits /14 bits
8 bits
8 bits mode
12 bits mode
14 bits mode
8 bits mode
12 bits mode
14 bits mode
500 MS/s
1 GS/s
500 MS/s
250 MS/s
100 MS/s
1 GS/s
500 MS/s
100 MS/s