Rear Panel - Owon FDS Series User Manual

the switch key again to power it on.

Rear Panel

1. Foldable Handle.
2. Heat Emission Hole.
3. Power Outlet.
4. Fuse .
5. Foot Rest: To adjust the inclined angle of the oscilloscope.
6. DC input port(Option).
7. HDMI Interface: To connect HDMI output to the external monitor or
projector.
8. USB Host Interface: When the oscilloscope is connected to an external
USB device as a "master device", the USB Host interface is used to
transmit the data.
9. USB Device Interface: When the oscilloscope is connected to an external
USB device as a "slave device", the USB Device interface is used to
transmit the data. For example, use the interface to connect a PC or printer.
10.LAN Interface: The network interface to connect a PC or router.
11.External Trigger Input Interface (EXT Trig In).
12.Trig Out (P/F) Interface: Trigger output or pass/fail output port.
13.Keyhole: The safe lock can be used (to be purchased by the user). Lock
the oscilloscope to the fixed position through this keyhole to guarantee the
security of the oscilloscope.
3.Primary User Guide
Figure 3- 2:Rear Panel
9