Table of Contents
Advertisement
6.Use Arbitrary Waveform/Function Generator
Select Amplitude Sync as On in the menu below. When adjusting the
amplitude of one channel, that of the other changes simultaneously.
Set the waveform
(1) Click CH 1 or CH 2 display window to display the setting window of the
signal generator.
(2) Select the waveform required and corresponding waveform setting menu
from the menu items at the lower part of the window.
(3) Operate the setting menu to set the parameters of the waveform required.
Example: Press Frequency in the menu below (if there is only Period other
than Frequency, click the title to switch it to Frequency), and set the required
value, the specific methods are as follows.
There are 3 methods to change the parameter values selected:
Use digital soft keyboard input mode: Click Numeric Display Box and
the soft keyboard appears, and input the required value directly.
Use gear input mode:
113
Advertisement
Table of Contents
