8. Technical Specifications
Unless otherwise stated, all technical specifications are applicable to the
probe with the attenuation switch set to 10X and this series of oscilloscopes.
The oscilloscope must first meet the following two conditions to meet these
specifications and standards:
■ The instrument must be operated continuously for more than 30
minutes at the specified operating temperature.
■ If the operating temperature variation range reaches or exceeds
5℃, the system function menu must be opened to execute the
"automatic correction" program (see automatic correction in "System
Settings" on P18).
All specifications are guaranteed except those marked "typical".
Oscilloscope
Characteristics
Bandwidth
Channel
Sampling method
Real-time sampling
rate
Sampling
Waveform
rate
Input coupling
Input impedance
(DC coupling)
Input
Probe attenuation
Maximu input voltage 400 V (DC + AC ,PK - PK)
Bandwidth limit
Sampling rate range
Horizontal
HDS242(S)
HDS272(S)
HDS2102(S) 100 MHz
2
Sampling, peak detection
HDS242(S)
HDS272(S)
HDS2102(S)
refresh
10,000 wfms/s
DC, AC, ground
1 MΩ±2%, in parallel with 16 pF±10 pF
1X 、10X、100X、1000X 、10000X
20 MHz ,Full bandwidth
0.25 Sa/s~250 MSa/s
33
Description
40 MHz
70 MHz
125 MSa/s (Dual channel)
250 MSa/s (Single channel)
250 MSa/s (Dual channel)
500 MSa/s (Single channel)