Power Setting Window - Owon FDS Series User Manual

3. Actual Output Value of Current.
4. Actual Output Power.
5. Set Values of Output Voltage/Current.
6. Display Constant Voltage/Constant Current.
CV: Constant Voltage Output;
CC: Constant Current Output.

Power Setting Window

Click Screen Power Display window or press Setting key at the power supply
area on the screen to display/hide the power measurement setting window.
The descriptions of Power Setting Window setting are shown in the table
below:
Menu
Independent
Parallel Set current function mode.
Series
CH1 Setting CH1 channel output parameter;
CH2 Setting CH2 channel output parameter.
Output Click to enable/disable voltage output.
Click "Set Voltage" soft key to pop up the voltage setting box,
directly input the voltage value to be set and click the unit to
confirm; or directly click Gear Input Box (- or +) or turn
Set Voltage
General knob to set the voltage value, then click < > or
12.0V
Quickly set the voltage value, click Confirm to complete the
7.Use the Power Supply
Descriptions
key to move the cursor and select the digit to be set.
121