How To Set Display System - Owon FDS Series User Manual

5. Create the expression, then select Confirm in the keyboard to
implement.
6. Click Display. When the switch label is highlighted on the right, it is
enabled. The pink Math and formula will be displayed at the lower left
corner of the screen.
7. Click the Numeric Display Box of Scale in the menu and turn General
knob to adjust the vertical gear of Math waveform.
8. Click Vertical in the menu, click Numeric Input Box to directly input
the vertical position of Math waveform to be set and click the unit to
confirm; or click Gear Input Box (- or +) or turn General knob to set the
vertical position of Math waveform to be set and click < > or press
to move the cursor and select the digit to be set.

How to set display system

Press Display key or click Display in other modules of main menu window
at the lower right of the screen.
The descriptions of Display Setting Menu are shown in the table below:
Menu Setting
Point
Type
Vector
5.Use the Oscilloscope
Descriptions
Only display the acquisition points.
Vector filling displays the space between
adjacent acquisition points in the middle.
74