11. Technical Specifications; Oscilloscope - Owon XDS3104A User Manual

11. Technical Specifications

Unless otherwise specified, the technical specifications applied are for XDS3000
dual-channel series only, and Probes attenuation set as 10X. Only if the oscilloscope
fulfills the following two conditions at first, these specification standards can be
reached.
 This instrument should run for at least 30 minutes continuously under the
specified operating temperature.
 If change of the operating temperature is up to or exceeds 5℃, do a
"Self-calibration" procedure (see "How to Implement Self-calibration" on P14).
All specification standards can be fulfilled, except one(s) marked with the word
"Typical".

Oscilloscope

Performance Characteristics
Bandwidth
Vertical Resolution (A/D)
Channel
Waveform Refresh Rate
Multi-level Gray Scale Display &
Color Temperature Display
Instruction
XDS3062A 60 MHz
XDS3102(A) 100 MHz
8 bits mode
12 bits mode
XDS3102AP
14 bits mode
XDS3202E 200 MHz
8 bits mode
12 bits mode
XDS3202A
14 bits mode
XDS3202 200 MHz
XDS3302 300 MHz
XDS3062A 12 bits
XDS3102A 12 bits
XDS3102AP 14 bits
XDS3102 8 bits
XDS3202E 8 bits
XDS3202A 14 bits
XDS3202 8 bits
XDS3302 8 bits
2 + 1 (External)
75,000 wfms/s
XDS3062A
Not support
XDS3102A
139
100 MHz
25 MHz
200 MHz
150 MHz
20 MHz