A General Knowledge Of The Structure Of The Instrument; Front Panel - Owon FDS Series User Manual

A general knowledge of the structure of the instrument

This chapter gives a brief description and introduction to the operations and
functions of the front panel of the instrument, so as to facilitate your operations
of the instrument in the shortest time.

Front Panel

On the instrument panel, knobs and function buttons are used to set different
options for current menu, and other buttons are used to enter different function
menus or directly obtain specific function application.
1. Display area.
2. Touch key.
3. Android function keys.
4. General knob and arrow keys.
5. Oscilloscope key and knob control area.
6. Probe compensation: 5V/1kHz signal output.
7. Multimeter keys and port control area.
8. Signal generator key and port control area.
9. USB Host Interface: When the oscilloscope is connected to an external
USB device as a "master device", the USB Host interface is used to
transmit the data.
10.Power key and output port control area.
11.Headphone socket.
12.Instrument switch with memory (self-lock) switch and auto memory of last
shutdown; if the instrument is shut down by powering the supply off, there is
no need to press the switch to start it up after next power-on; if the
instrument is shut down by pressing the switch key, it is required to press
3.Primary User Guide
Figure 3- 1 Front panel
8