Advanced User Guide for Oscilloscope
In the previous chapter, basic operations of the oscilloscope, function area
of the front panel and the roles of the keys and knobs are introduced for
the user to determine the change of instrument settings by observing the
status bar. For any details of the operations and methods mentioned
above, refer to Chapter 3 "Primary User Guide"
This chapter covers the following contents:
How to set the vertical system
How to set the horizontal system
How to set trigger
How to conduct automatic measurement
How to conduct collection settings
How to conduct cursor measurement
How to realize waveform operation function
How to set the display system
How to set XY mode
How to save and print
How to set FFT
How to set DIR(digital filtering)
How to conduct frequency response analysis
How to pass the test setting
How to conduct reference waveform
How to conduct probe check
How to clone and restore waveform
How to use execution keys
Please carefully read this chapter to understand various measuring functions
and other operation methods of the oscilloscope.
How to set the vertical system
In the vertical system control area, there are two switch keys (CH1 and
CH2) and four knobs (two Vertical Displacement knobs and two Vertical
Gear knob for each channel).
5.Use the Oscilloscope
28