11. Technical Specifications
Unless otherwise specified, the technical specifications applied are for XDS3000
dual-channel series only, and Probes attenuation set as 10X. Only if the oscilloscope
fulfills the following two conditions at first, these specification standards can be
reached.
This instrument should run for at least 30 minutes continuously under the
specified operating temperature.
If change of the operating temperature is up to or exceeds 5℃, do a
"Self-calibration" procedure (see "How to Implement Self-calibration" on P14).
All specification standards can be fulfilled, except one(s) marked with the word
"Typical".
Oscilloscope
Performance Characteristics
Bandwidth
Vertical Resolution (A/D)
Channel
Waveform Refresh Rate
Multi-level Gray Scale Display &
Color Temperature Display
11.Technical Specifications
XDS3062A
XDS3102(A) 100 MHz
XDS3102AP
XDS3202E
XDS3202A
XDS3202
XDS3302
XDS3062A
XDS3102A
XDS3102AP 14 bits
XDS3102
XDS3202E
XDS3202A
XDS3202
XDS3302
XDS3062A
XDS3102A
139
Instruction
60 MHz
8 bits mode
100 MHz
12 bits mode
14 bits mode
25 MHz
200 MHz
8 bits mode
200 MHz
12 bits mode
150 MHz
14 bits mode
20 MHz
200 MHz
300 MHz
12 bits
12 bits
8 bits
8 bits
14 bits
8 bits
8 bits
2 + 1 (External)
75,000 wfms/s
Not support