Technical Specifications - Owon VDS1022l User Manual

IV. Technical Specifications
Unless otherwise specified, the technical specifications applied are for VDS series only, and Probes attenuation set as 10X. Only if the
oscilloscope fulfills the following two conditions at first, these specification standards can be reached.
 This instrument should run for at least 30 minutes continuously under the specified operating temperature.
 If change of the operating temperature is up to or exceeds 5℃, do the "Self Cal" procedure in Utility menu
(see Self Cal).
Note: VDS1022(I) represents two models of instrument, VDS1022I and VDS1022. "I" indicates the model has the power supply isolation and
earth ground isolation between the oscilloscope and PC (optional), the two channels are non-isolated electrically. The same as VDS2052(I).
"L" indicates LAN port (optional).
Performance Characteristics
Bandwidth
Channel
Mode
Acquisition
Sample rate
(real time)
Input coupling
Input impedance
Probe attenuation
factor
Input
Max. input voltage
Instruction
VDS1022(I) 25 MHz
VDS2052(I) 50 MHz
VDS2062(L
60 MHz
)
VDS3102(L
100 MHz
)
VDS2064(L
60 MHz
)
VDS3104(L
100 MHz
)
VDS1022(I)
VDS2052(I)
VDS2062(L
2 + 1 (*External)
)
VDS3102(L
)
VDS2064(L
)
4 + 1 (*External)
VDS3104(L
)
Normal, Peak detect, Averaging
Dual CH 100 MS/s
VDS1022(I)
Single CH 100 MS/s
Dual CH 250 MS/s
VDS2052(I)
Single CH 250 MS/s
Dual CH 250 MS/s
VDS2062(L
)
Single CH 500 MS/s
Dual CH 500 MS/s
VDS3102(L
)
Single CH 1 GS/s
Four CH 125 MS/s
VDS2064(L
Dual CH 250 MS/s
)
Single CH 500 GS/s
Four CH 250 MS/s
VDS3104(L
Dual CH 500 MS/s
)
Single CH 1 GS/s
DC, AC , Ground
1 MΩ ± 2%, in parallel with 10 pF ± 5 pF
1X, 10X, 100X, 1000X
VDS1022I 400 V (PK-PK) (DC + AC
VDS2052I PK-PK)
VDS1022
VDS2052 40 V (PK-PK) (DC + AC
VDS2062(L PK-PK)
)
33