Measure With Multimeter; Measure Ac Or Dc Voltage; Measure Ac Or Dc Current - Owon FDS Series User Manual

Soft Key
mV, V
Function
uA, mA, A Measure the current.
AC/DC
Hold
Settings REL
Auto
Manual
Zoom box

Measure with Multimeter

Measure AC or DC Voltage

(1) Click the Multimeter display window on the screen or press Setting key at
the multimeter area of the front panel to display the multimeter setting
window. Click to select mV or V.
(2) Click AC/DC below to select AC or DC. When ACV is displayed at the
multimeter display window, it indicates AC voltage is selected; when DCV
is displayed, it indicates DC voltage is selected.
(3) Connect the black test pen to the COM end of the front panel and the red
test pen to the input end of
(4) Connect the other end of the red test pen and the black test pen to the
points to be tested respectively and read the display values.

Measure AC or DC Current

To measure the AC or DC current less than 200mA, perform the following
steps:
8.Use the Multimeter
Descriptions
Measure the voltage.
Measure the capacitance.
Measure the
testing/measure the diode.
Switch AC/DC upon voltage or current
measurement.
Keep the current reading on the display.
Reading is the difference between the stored
reference value and the input signal.
Select auto range mode.
Select manual range mode and press to
switch the range.
Open/Close the parameter display zoom box.
.
125
resistance/on-off