Use The Oscilloscope; A General Knowledge Of Oscilloscope; Front Panel Oscilloscope Area - Owon FDS Series User Manual

5.Use the Oscilloscope

A general Knowledge of Oscilloscope

Front Panel Oscilloscope Area

Instructions:
1. Trigger state.
2. Oscilloscope function shortcut keys.
3. General knob and arrow keys.
General knob: When
the General knob can be turned to select current menu or set the value.
Arrow keys: Move to select the parameter.
4. Function key area: There are 9 keys in total.
5. Shortcut key: Run/Stop,Signal.
6. Trigger control area:
Contain two keys and one knob.
"Trigger Level" knob is to adjust the trigger level.
Menu button correspond to the settings of the trigger system;
Force button is the forced trigger shortcut button.
7. Vertical control area:
Contain two keys and four knobs.
In the oscilloscope state, the "CH1" key and "CH2" key correspond to the
channel switch of Channel 1 and Channel 2, respectively. Two "Vertical
Displacement" knobs are to control the vertical displacement of Channel 1
and Channel 2, respectively. And two "Gear" knobs are used to control the
voltage of Channel 1 and Channel 2, respectively
5.Use the Oscilloscope
appears in the screen menu, it indicates that
17