Xstatus Video Output Connector [N] Connected; Xstatus Video Output Connector [N] Monitorrole; Xstatus Video Output Connector [N] Resolution Height; Xstatus Video Output Connector [N] Resolution Width - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

xStatus Video Input Source [n] MediaChannelId

For internal use only.
Value space of the result returned:
<Integer>
Example:
xStatus Video Input Source MediaChannelId
*s Video Input Source 1 MediaChannelId: 2
*s Video Input Source 2 MediaChannelId: 3
** end

xStatus Video Output

Shows the top level overview of the video output status.

xStatus Video Output Connector [n] Connected

Describes whether a device (for example a display) is connected to the output connector or not.
When a display enters standby mode, the endpoint may not be able to detect it. The connector
status will then return False/Unknown even if the display is physically connected.
True: A device is connected to the video output connector.
False: Nothing is connected to the video output connector.
Value space of the result returned:
<True/False>
Example:
xStatus Video Output Connector 1 Connected
*s Video Output Connector 1 Connected: True
** end
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration

xStatus Video Output Connector [n] MonitorRole

xStatus Video Output Connector [n] Resolution Height

xStatus Video Output Connector [n] Resolution Width

218
xCommand
Describes which video stream is shown on the device that is connected to the video output
connector.
First/Second/Third: The role of the monitor in a multimonitor setup. In a singlemonitor setup, there is
no difference between First, Second and Third.
PresentationOnly: Shows presentation video stream if active.
Recorder: Shows all participants, including the local main video. If active, shows also the
presentation.
Value space of the result returned:
<First/Second/Third/PresentationOnly/Recorder>
Example:
xStatus Video Output Connector 1 MonitorRole
*s Video Output Connector 1 MonitorRole: First
** end
Shows the resolution height (in pixels) for the video output connector.
Value space of the result returned:
<120..3000>
Example:
xStatus Video Output Connector 1 Resolution Height
*s Video Output Connector 1 Resolution Height: 1080
** en
Shows the resolution width (in pixels) for the video output connector.
Value space of the result returned:
<176..4000>
Example:
xStatus Video Output Connector 1 Resolution Width
*s Video Output Connector 1 Resolution Width: 1920
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.