Table of Contents
Advertisement
Operation in the Operating State
8.3 Operation Options
If you click Update Device Data, you can read the parameter set and the process data of the device. The
²
device data is loaded and the view completed.
You can fully operate and set the connected devices under Online access in the DIGSI 5 project tree.
²
Adding a Selected Device to a Project
You can accept devices identified online into an existing project. The devices are also available for possible
offline operation. You can accept the devices in 2 different ways:
Use Drag & Drop to assign the online device to the corresponding device created in a project.
²
NOTE
i
i
Make sure that the created device coincides with the device identified online. Otherwise, it is not accepted
into the project.
If you have not done so yet, add the online device to the opened project (see following image) via the
²
context menu (right mouse-click).
[scprohin-080916-01, 1, en_US]
Figure 8-3
Offline Operation Using DIGSI 5
8.3.3
Offline operation offers you the ability to carry out complete configurations and extensive parameterization of
a device. Once you have finished all settings, you can load the configuration from the DIGSI 5 PC to the device.
If the loading operation was successful, the device restarts automatically.
Typical Applications of Offline Configuration
Creating a configuration by selecting a suitable application template and subsequently adjusting the
²
settings to the individual conditions
Reusing a standardized configuration in multiple devices
²
Extensive changes in configurations and setting parameters
²
122
Adding a Selected Device Configuration to a Project
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018
Advertisement
Table of Contents
