Table of Contents
Advertisement
RADIUS Server Settings
To activate the role-based access control, you first have to make the following settings via DIGSI 5. You can
activate up to 2 RADIUS servers. The following figure shows the possible connection between a SIPROTEC 5
device and the RADIUS servers.
[dw_use_RADIUS-server, 1, en_US]
Figure 11-7
•
Open a project in DIGSI 5.
•
Open the Safety and security menu item in the project tree.
•
Double-click the Operations safety and access control menu item.
[sc_rbacacccontr, 1, en_US]
Figure 11-8
First, establish the connection between the SIPROTEC 5 device and a RADIUS server as the authentication
server.
•
Activate the access control.
[sc_rbacselect, 1, en_US]
Figure 11-9
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018
Connection between Device and RADIUS Server
Project Tree
Switching on the Access Control
Security Settings in the Device
11.9 Operational Security and Access Control
255
Advertisement
Table of Contents
