Table of Contents
Advertisement
•
Diagnostic information:
Here detailed information on the individual hardware and software components are stored.
NOTE
i
i
The device remains in commissioning mode until you set the device in the process mode consciously or
until the internal monitoring time (statement of time) has expired. You reach the process mode by clicking
the link in the upper right of the working area. The settings sheet Device information opens. Go to Device
mode to set the device in process mode.
You can execute more tests in this mode.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018
Commissioning
9.2 Test Suite Integrated in the Device
199
Advertisement
Table of Contents
