Operation - Siemens L-828 Manual

L-828 CCRs LC-Type (4, 7.5, and 10 kW/6.6 A/60 Hz)
Installation
(contd.)

6. Operation

 2002 Siemens Airfield Solutions, Incorporated
All rights reserved
•
Route electrical wiring along a protected path. Make sure they
will not be damaged by moving equipment.
•
Protect components from damage, wear, and harsh environment
conditions.
•
Allow ample room for maintenance, panel accessibility, and cover
removal.
•
Protect equipment with safety devices as specified by applicable
safety regulations.
• If safety devices must be removed for installation, install them
immediately after the work is completed and check them for
proper functioning.
Only qualified personnel, physically capable of operating the
equipment and with no impairments in their judgment or reaction
times, should operate this equipment.
Read all system component manuals before operating this
equipment. A thorough understanding of system components and
their operation will help you operate the system safely and
efficiently.
•
Before starting this equipment, check all safety interlocks, fire-
detection systems, and protective devices such as panels and
covers. Make sure all devices are fully functional. Do not operate
the system if these devices are not working properly. Do not
deactivate or bypass automatic safety interlocks or locked-out
electrical disconnects or pneumatic valves.
•
Never operate equipment with a known malfunction.
•
Do not attempt to operate or service electrical equipment if
standing water is present.
•
Use this equipment only in the environments for which it is rated.
Do not operate this equipment in humid, flammable, or explosive
environments unless it has been rated for safe operation in these
environments.
•
Never touch exposed electrical connections on equipment while
the power is ON.
96A0104B
Issued 6/02
Safety
Page 1-4