Table of Contents
Advertisement
Maintenance, On-the-Spot Assistance and Test
10.2 Error Search and Correction
NOTE
i
i
Ensure that the protection and control functions are deactivated in fallback mode.
Fallback mode is evident from the termination of the life contact, the Error LED, and the Fallback mode
header in the device display. In this mode the outputs of the device are brought to their initial state. Access to
the hardware is impossible. A limited operating menu is available for further actions.
Fallback Mode
You can select various information areas and have them displayed in the Fallback mode. The reason for the
fallback are shown in the lower part of the display as an indication (1 in
softkey <More> on the right-hand side, a list of entries is displayed that was generated during the diagnosis of
the device (2 in
to open the currently selected entry. Precise information about the fallback will be displayed (3 in
Figure
10-3).
[scfbmenudet-030914-01, 1, en_US]
Figure 10-3
The menu items are summarized and briefly presented below.
Fallback Mode Submenus
You can use the navigation keys to select the individual menu entries and branch them into the submenus.
216
Figure
10-3). Use the navigation keys to select the relevant entry or use the softkey <Details>
Start Menu of Fallback Mode
Figure
10-3). When selecting the
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018
Advertisement
Table of Contents
