Siemens SIPROTEC 5 V7.80 Operation page 153

[scoprlog-090413-01.tif, 1, en_US]
Figure 8-34
•
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site
operation panel.
•
The option to delete the entire log is offered to you in the footer of the display at the bottom left. Use the
softkeys below under the display to activate the command prompts. Confirm the request to Delete.
•
After being prompted, enter the password and confirm with Enter.
•
After being prompted, confirm the Deletion of all entries with Ok.
Deleting Logs from the PC with DIGSI 5
•
To reach the selected log of your SIPROTEC 5 device, use the project-tree window (for example, opera-
tional log).
Project → Device → Process data → Logs → Operational log
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018
Deleting the Operational Log on the On-Site Operation Panel
Operation in the Operating State
8.5 Logs
153