Table of Contents
Advertisement
Using On-Site Operation Panel
5.2 Overview of Operator Elements and Display Elements
Operator Element/Display
Element
NOTE
i
i
Note that terminating the contacts of saved output indications can lead to reactions in the device environ-
ment.
74
Function
Function-keys menu
The configured assignment of function keys is visible in the function key
menu. The assignment of function keys <F1> to <F8> is defined in DIGSI 5.
They have different defaults depending on the application template. A
default assignment exists for:
•
<F9>
Language change: Jump to the selection menu for languages
<F9> cannot be configured via DIGSI 5
Control key for activating standard control display
If no control display is available (not configured or device with small
display), you are taken directly to the standard default display.
If it has not already been selected, and depending on device configuration,
pressing the <CTRL> key jumps directly to:
•
Large Display → Default display
•
Large display/at least one control display → Standardcontrol display
•
Small Display → Default display
Control key for switching on a selected switching object
Select the switching object either in the Control menu or in the control
display (only in devices with large display).
Control key for switching off a selected switching object
Select the switching object either in the Control menu or in the control
display (only in devices with large display).
USB ports
There are 2 USB ports with a plastic cover available to you:
•
Top USB port (host)
Connection for a DIGSI PC
•
Bottom USB port
Reserved for the future applications
16 parameterizable LEDs
•
Dual-colored configurable (red and green)
Key for resetting saved displays and contacts
With this key, you can reset stored information that is configured on the
LEDs, on the display or on output contacts. The initial state is then restored.
When the key is pressed, all LEDs are activated simultaneously, allowing
you to test the LEDs.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018
Advertisement
Table of Contents
