Table of Contents
Advertisement
[schislog-090413-01.tif, 1, en_US]
Figure 8-21
Indication Categories in the Setting-History Log
For this log, there is selected information that is stored in case of successful as well as unsuccessful setting
changes. The following list gives you an overview of this information.
Table 8-7
Displayed Information
Selection editing+
Reject+
PG activation+
PG activation-
set+
Acceptance+
Acceptance-
DCF loaded
SG 1
SG 2
SG 3
SG 4
SG 5
SG 6
SG 7
SG 8
NOTE
i
i
•
The logged indications are preconfigured and cannot be changed!
•
The log, which is organized as a ring buffer, cannot be deleted by the user!
•
If you want to archive security-relevant information without loss of information, you must regularly
read this log.
•
You cannot route additional indication objects to the setting-history log.
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018
Reading the Setting-History Log on the On-Site Operation Panel of the Device
Overview of Indication Types
Explanation
Selection of settings group to be edited
Rejection of all changes successful
PG activation via command successful
PG activation via command failed
Parameter value was changed
Acceptance of change successful
Acceptance of change failed
DCF loaded into device
Settings group 1
Settings group 2
Settings group 3
Settings group 4
Settings group 5
Settings group 6
Settings group 7
Settings group 8
Operation in the Operating State
8.5 Logs
143
Advertisement
Table of Contents
