Using DIGSI 5
6.2 Operator Actions in the Offline and Online Area
6.2
Operator Actions in the Offline and Online Area
You can execute operator actions in the offline configurations or online on the device.
NOTE
i
i
To avoid unintentional changes and switching operations during operation, some operator actions are
protected by a confirmation ID.
Protect access to your protection devices using a secure connection password. This will prevent undesirable
changes by third parties.
Offline Area (Project View)
The offline configurations indicated offline in a project include all data to be edited of a protection device on
the engineering PC. There is no connection to a physically existing device. You can execute the following
actions in the offline area:
•
Creating a topology as a single-line diagram
•
Adding SIPROTEC devices to the topology
•
Configuring hardware of a SIPROTEC device
•
Defining functional scope of a SIPROTEC device
•
Entering individual function settings and displaying characteristic curves graphically
•
Routing information
•
Editing display diagrams
•
Designing logic functions such as interlocking mechanisms
•
Configuring the communication network and setting communication parameters
•
Displaying save measured values and indications
•
Displaying saved fault records and evaluating them with SIGRA
•
Exporting and printing data
Devices Available Online (Online Mode)
In online mode there is a connection between a PC and a device. In this mode you can carry out the following
actions:
•
Transferring setting values from the PC to the SIPROTEC device
•
Transferring setting values from the SIPROTEC device to the PC and saving in files
•
Transferring indications, measured values and fault records from the SIPROTEC device to the PC and
saving in files
•
Setting limiting values
•
Executing test functions
•
Controlling equipment, placing markers and canceling blocks
•
Executing initial start or restart of the SIPROTEC device
•
Setting date and time
•
Changing confirmation IDs and passwords
•
Adding devices to projects
•
Complete processing of devices
94
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018