Siemens SIPROTEC 5 V7.80 Operation page 90

Using On-Site Operation Panel
5.8 Display of Routings and Status
Example of a Transformer Tap Changer
You can also use a binary input to display the tap position of the transformer tap changer. In this case, you
must set the X (routed) property in the DIGSI 5 Information routing (see figure below). X (routed) means that
the binary input was routed.
[scranma3-260814-01, 1, en_US]
Figure 5-16
The figure below indicates that Binaryinput1.1 displays the position of the transformer tap changer 1.
[scbinipt3-260814-01, 1, en_US]
Figure 5-17
90
Example for Transformer Tap Changer 1:
Position of the Transformer Tap Changer 1
SIPROTEC 5, Operation, Manual
C53000-G5040-C003-9, Edition 06.2018