Configuring A Library Option; Figure 38 Configure: Options Screen - Quantum P4000 User Manual

Configuring a
Library Option
3
Figure 38 Configure:
Options Screen
• P3000 Identity Mode—causes the library to return the same inquiry
string as the P3000 library.
To configure a library option:
1 In the screen, press the
Operator
The GUI displays the
2 Press the button with the desired option.
3 Using the arrow buttons, scroll through available values for the
selected option.
4 When the New Value box displays the desired value, press the
Execute button to apply the new value.
The Current Value box displays the new value.
5 Repeat steps 2 through 4 to change other configuration options.
6 When you have finished making changes to library options, press the
button until you return to the initial
Back
Back
About
System
Configure: Options
Off-line
Power-On
Standby
Retries
Load Port
Barcode
Labels
Auto
O
Load
P3000
Stop
Identity
Quantum P4000 and P7000 Libraries User's Guide
Chapter 3 Operator Commands
Configure Options
Configure: Options
Forward
Overview Tapes
Auto
Clean
Auto
Inventory
Temp.
Detection
Power-On
Security
Configuring Library Options
button.
screen (see figure 38).
screen.
Operator
Home
Operator
Current
Value:
New Value:
Online
Execute
67