Table of Contents
Advertisement
Chapter 3 Operator Commands
Configuring Library Options
Configuring a
3
Library Option
50
Retries—causes the library to retry a failed command
•
automatically before issuing an error message. The default
settting is Enabled.
Bar Code Labels—turns bar code scanning on or off during
•
inventory. It should be disabled when the library contains
cartridges that are not labeled. The default setting is Disabled.
Auto Inventory—causes the library to perform an inventory
•
whenever the library is powered up. The default setting is
Disabled.
Auto Load—causes the library to automatically move cartridges
•
in the load port to empty storage bins as soon as the load port
door closes. The default setting is Disable.
Temp. Detection—enables or disables the over-temperature
•
detection warning and shutdown features of the library. The
default setting is Enabled.
Power-On Security—determines the library security level when
•
powered up. The default setting is User.
P3000 Identity Mode—causes the library to return the same
•
inquiry string as the ATL P3000 library
To configure a library option:
On the Operator screen, press the Configure Options button.
1
The GUI displays the Configure: Options screen (see
Press the button with the desired option.
2
Using the arrow buttons, scroll through available values for the
3
selected option.
When the New Value box displays the desired value, press the
4
Execute button to apply the new value.
The Current Value box displays the new value.
Repeat steps 2 through 4 to change other configuration options.
5
ATL P2000 Series Automated Tape Library User's Guide
figure
29).
Advertisement
Table of Contents
