Table of Contents
Advertisement
Quantum DX-Series System Unpacking and Installation Instructions
Document 6513502-06 A01
October 2006
Configuring the Email
0
Settings
Figure 66 Email Tab
78
5 When all of the virtual devices have been assigned to the appropriate
port, click
to accept the port settings.
Apply
Microsoft Windows has a known issue recognizing more than
Note:
eight LUNs on a single Fibre Channel port. See Microsoft
Knowledge Base Article 310072:
http://support.microsoft.com/default.aspx?scid=kb;en-us;310072
information on reconfiguring Windows to overcome this
limitation.
The settings will take effect after the next system reboot (see
the System
on page 86).
To configure the Email settings:
1 To access the
Email
2 The management frame displays the
3 Edit the Email server information as desired (see
of the fields) and click
4 After editing the Email server information, click the
the notification system. If the test is not successful, verify the email server
information and the administrative recipients list and try again.
The
tab details are shown in
Email
Configuring the DX-Series System
page, from the
Remote Alerts
tab (see
Email
.
Apply
table 12
and
for
Restarting
page, click the
tab.
Email
figure
66).
table 12
for a description
button to test
Send
table
13.
Advertisement
Table of Contents
