Figure 53 Log In Screen
Quantum DX-Series System Unpacking and Installation Instructions
Connecting the Service PC to the Network
1 Connect the service PC to the network switch on the same subnet as the
DX-Series controller with an Ethernet cable.
You can also directly connect the service PC to Eth0 on the
Note:
DX-Series controller using a cross-over cable.
2 On the service PC, open the Internet browser software.
If Internet Explorer is the default browser on the client system:
Note:
•
The latest security updates for Microsoft VM (virtual
machine) must be installed on the client system.
•
The security settings must be set no higher than
"medium". If the settings are set to "high security", the
browser will not be able to login to the DX-Series system
since the system needs write access to the client.
•
The "Play animations in web pages" item in the Internet
Options/Advanced/Multimedia menu must be enabled.
3 In the
field, enter the DNS name or IP address configured in
Address
Configuring User Options
The
screen displays (see
Log In
Configuring the DX-Series System
Document 6513502-06 A01
on page 59.
figure
53):
October 2006
0
65