Quantum DX100 Unpacking And Installation Instructions page 19

Figure 13 Installing the
Mounting Brackets
Quantum DX-Series System Unpacking and Installation Instructions
8 Install each of the hard drive sleds into the DX-Series storage array
chassis (see figure 14).
The hard drives must be installed in the proper sequence since
Note:
RAID sets have already been established at the factory. Refer
to the label on the bottom of the drive sled for the drive
number. The hard drives must also be installed in the array in
which it was configured.
Installing the DX-Series System
Document 6513502-06 A01
October 2006
19