Quantum DX100 Unpacking And Installation Instructions page 74

Quantum DX-Series System Unpacking and Installation Instructions
Document 6513502-06 A01
October 2006
Figure 62 SSL
Configuration
74
3 Under
Administrator Password
field and again in the
Password
The passwords must be lower case and limited to 15
Note:
characters.
4 Click .
Apply
A page indicates the password has been changed.
Results
SSL
SSL (Secure Sockets Layer) is a protocol that provides security and privacy
over the Internet by negotiating encryption keys before transmitting data
between a client and a server.
To establish a secure SSL connection, your DX-Series system must have an
encryption key assigned to it by a Certification Authority in the form of a
certificate file, private key file, and pass phrase. Once you install these
components, you can establish a secure connection using the SSL protocol.
The Quantum DX-Series system comes with a SSL certificate; however, you
can purchase other certificates and add them to the DX-Series SSL
configuration.
To access the page:
SSL
1 In the page, click
Security
The management frame displays the
The default setting for SSL is
Note:
2 To enable SSL, select
Configuring the DX-Series System
, enter the desired password in the
Confirm New Password
.
SSL
page (see
SSL
disabled
and click .
Enable Apply
New
field.
figure 62).
.
0