Quantum DX100 Unpacking And Installation Instructions page 34

Quantum DX-Series System Unpacking and Installation Instructions
Document 6513502-06 A01
October 2006
Figure 31 Installing the AC
Power Cable
Figure 32 Connecting the
First Power Connector
34
AC power cable
4 Connect the first power connector on the controller to outlet J1 on the first
AC power sequencer and secure with a tie wrap (see
Tie wrap
First power connector
5 Connect the second power connector on the controller to outlet J1 on the
second AC power sequencer and secure with a tie wrap.
Installing the DX-Series System
Tension screw
figure 32).