Table of Contents
Advertisement
Table 14 SNMP Trap
Selections
Figure 68 SNMP Trap
Destinations
Quantum DX-Series System Unpacking and Installation Instructions
Field
Informational
Warning
Failure
Available
Unavailable
4 Click
.
Apply
A
page displays indicating the configuration has been changed.
Results
5 Click
in the Trap Destination area (see
New
addresses that are to receive the traps generated by the
system,
for example,
may be set. If less than five trap destinations are required, leave unused
fields blank.
Trap Destination
6 Click
to add the IP address to the trap destinations and return to the
Add
SNMP tab.
7 Click
in the Community Management area to edit the SNMP
New
communities (see
figure
Configuring the DX-Series System
Description
If selected,
Informational Traps
If selected,
Warning Traps
If selected,
Failure Traps
If selected, a trap is generated every time the
library transitions from an unavailable to an
available state.
If selected, a trap is generated every time the
library transitions from an available to an
unavailable state.
figure
. Up to five trap destination addresses
12.34.56.78
69).
Document 6513502-06 A01
October 2006
are enabled.
are enabled.
are enabled.
68), to set the IP
DX-Series
81
Advertisement
Table of Contents
