Table of Contents
Advertisement
Figure 52 DX-Series
Service Menu
Quantum DX-Series System Unpacking and Installation Instructions
4 Type 3 and press <Enter>.
The system prompts you to enter a serial number.
5 Enter the system serial number and press <Enter>.
The serial number insert is in the Read Me First packet
Note:
attached to the outside of the box.
The system prompts you to enter the number of licensed storage arrays.
6 Enter the number of licensed storage arrays and press <Enter>.
The system prompts you to confirm the service options.
7 Type y and press <Enter> to accept the service options.
The service options are saved and will take effect after the next reboot.
Continue with
Configuring User
Configuring User Options
To configure user options:
1 Type 4 (see
figure
52) and press <Enter> to configure the user options.
Configuring the DX-Series System
Document 6513502-06 A01
Options.
October 2006
0
59
Advertisement
Table of Contents
