Figure 10 Installing the
Storage Array Support
Brackets
Figure 11 Storage Array
Mounting Holes
Quantum DX-Series System Unpacking and Installation Instructions
Left support bracket
Right support bracket
2 With the support brackets installed, prepare the storage array mounting
holes if necessary. Refer to
required for your rack (see
Storage array
mounting holes
Left rail shown
3 Tighten the screws securing the front and back of the support brackets.
4 Tighten adjustment screws on each rail.
5 Carefully slide the storage array into the rack.
Installing the DX-Series System
Document 6513502-06 A01
table 2
to determine the type of hardware
figure 11
for hole location).
October 2006
17